15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 12/02/11 schematics dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) 1. 000( 25. 40) 0. 395 (10. 03) 0. 260 (6. 60) max 0. 020 (0. 50) 0. 300 (7. 62) 0. 118(3 .00) 0. 900(22 .86) 0. 100(2. 54) 0.268(6.80) allied da tec ode AHTA-2007S 2 1:1 19 18 1:1 1ct:1ct 4 5 6 7 8 9 10 17 16 15 14 13 12 11 rd1 rd2 td2 tx1 rx1 rx2 tx2 td1 1 3 20 1ct:1ct all specifications subject to change without notice. mechanical 10/100 base t dual port transformer AHTA-2007S cw/w: 28pf typ @ 100khz, 200mv polarity: 1-20, 4-17, 6-15, 9-12, in-phase ll: 0.5h max @ 100khz, 200mv dcr: 0.9 operating temp: 0oc to 70oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40-50mhz AHTA-2007S 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -14 60-80mhz -12 part number AHTA-2007S electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -35 0.3-30mhz -42 60mhz isolation ?
|